Universal Design – Versatile Applications — Universal LED dome reading light suitable for cars, SUVs, pickups, vans, RVs, and more. Can be used as a replacement for your factory roof light or installed anywhere additional lighting is needed in the cabin, trunk, or cargo area.
2-Position ON/OFF Switch — Features a two-position switch (ON/OFF) for manual control of the light.
High-Brightness LED Lighting — Equipped with high-brightness LED chips delivering powerful illumination with low power consumption (approx. 3-5W). Significantly brighter, cooler, and longer-lasting than factory halogen bulbs with a lifespan of 10,000+ hours.
Requires Self-Wiring – Flexible Power Options — This product comes with bare wires – you will need to connect it to a 12V power source. Three power options available – choose based on your vehicle and needs:
-
From Factory Dome Light: Remove your original dome light. Use a test light or multimeter to identify the positive wire (red/constant 12V), negative wire (black/ground), and door trigger wire (purple/white or yellow). Pass the factory wires through the center hole of the base plate, secure the base plate with screws, then connect the corresponding wires and insulate them. LED lights are polarity-sensitive – if they don't light up, reverse the connections.
-
From Fuse Box: Use a fuse tap or add-a-circuit to draw power from a constant (B+) or ACC source in your interior fuse box.
-
Direct from Battery: Connect directly to the battery terminals (install an inline fuse for safety).
Important Pre-Installation Notes — Always disconnect the battery before installation for safety. This product is designed for DC 12V vehicles only – do not install on vehicles with incompatible voltage. Review the manual before installation, identify each wire's function correctly, and insulate all connections properly to prevent shorts and blown fuses.
What's Included — Comes with LED dome light assembly×1 (includes housing, base plate, lens), mounting screws/bracket×1 set, user manual×1.
Note — This product requires self-wiring. Professional installation is recommended or should be performed under the guidance of an experienced individual. When drawing power from the factory dome light, pay close attention to polarity and insulation.
